Main Menu

VFD Variable Freq Drive Cable
AWG Size
No of Conductors
Voltage
Conductor
Cable Type


Wire & Cable Products

Wire & Cable Products

FREE GROUND SHIPPING!
> $350 & < 10 Lbs
FLAT RATE S&H RATES
< $350 & < 10 lbs

US48 Addresses ONLY!
Additional fees for AK, HI & International

VFD Variable Freq Drive Cable

(Results: 37 Found; Refine your results by making selections from the menu)


As another top cable choice offered by OneStopBuy.com through Belden and Alpha Cable, Variable Frequency Flexible Drive Cables are heavily relied upon for industrial purposes. One of their most important features is that they provide the ability for 3-phase AC electronic motor speeds to be changed in sync with the change of a motor load. Because of this, Variable Frequency Drive (VFD) cable allows the RPM on an industrial motor application to be ered alongside adjustments in output voltage and frequency levels.

Aside from a greater level of control over electronic processes, Variable Frequency Drive cables are known for generating a greater amount of energy savings and increasing the reliability, precision, and efficiency of induction motors in plants by preventing as much wear-and-tear from use. The typical design, which includes pulse width modulation, functions with motors of various power and sizes. Variable Frequency Drive cable also typically has tolerance levels of within 0.1% and can enable motors to run at levels lower than their maximum speeds.

AKA:
MC-HL
Armored VFD
Motor Supply Cable

  • 29500 - 16 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    16 AWG 4C 26x30 Stranded Tinned Copper Conductor - Aluminum Foil/Polyester Tape/85% Braid Overall Foil/TC Braid 85% Duofoil/TC Braid Shielding - Ultra Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 1000V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29501 - 14 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    The Belden 29501 is a wire that can be cut to various lengths. Contact One Stop Buy today for a variety of Belden VFD Cables to choose from, and so much more!
  • 29502 - 12 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    This Belden 29502 wire is a Belden VFD cable that is cut to length specifically for you. Check out One Stop Buy for all of your electrical parts needs!
  • 29503 - 10 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    10 AWG 4C 105x30 Stranded Tinned Copper Conductor - Aluminum Foil/Polyester Tape/85% Braid Overall Foil/TC Braid 85% Duofoil/TC Braid Shielding - Ultra Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 1000V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29504 - 8 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    8 AWG 4C 7x19x25 Stranded Tinned Copper Conductor - Aluminum Foil/Polyester Tape/85% Braid Overall Foil/TC Braid 85% Duofoil/TC Braid Shielding - Ultra Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 1000V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29505 - 6 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    6 AWG 4C 7x19x27 Stranded Tinned Copper Conductor - Aluminum Foil/Polyester Tape/85% Braid Overall Foil/TC Braid 85% Duofoil/TC Braid Shielding - Ultra Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 1000V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29506 - 4 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    4 AWG 4C 7x19x25 Stranded Tinned Copper Conductor - Aluminum Foil/Polyester Tape/85% Braid Overall Foil/TC Braid 85% Duofoil/TC Braid Shielding - Ultra Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 1000V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29507 - 2 AWG 4C VFD Cable Ultra Flexible Motor Supply Tinned Copper Overall Foil/TC Braid 85% UL Type TC-ER 1000V - Black Belden
    2 AWG 4C 7x19x23 Stranded Tinned Copper Conductor - Aluminum Foil/Polyester Tape/85% Braid Overall Foil/TC Braid 85% Duofoil/TC Braid Shielding - Ultra Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 1000V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29512 - 12/16 AWG 4/2C Overall Foil/TC Braid 85% Composite Flexible Motor Supply VFD Cable UL Type TC-ER - PVC - 1000V - Black - Belden
    Composite - 1000V UL Flexible Motor Supply Cable - 1 pr.(Signal)-16 AWG stranded (26x30) TC cond., XLPE insul., Beldfoil? shield (100% c), drain; 3 cond.(VFD) plus 1 ground wire-12 AWG stranded (65x30) TC cond., XLPE insul., Duofoil? and TC braid Shield (100% a85% c), drain, PVC jacket.
  • 29513 - 10/16 AWG 4/2C Overall Foil/TC Braid 85% Composite Flexible Motor Supply VFD Cable UL Type TC-ER - PVC - 1000V - Black - Belden
    Composite - 1000V UL Flexible Motor Supply Cable - 1 pr.(Signal)-16 AWG stranded (26x30) TC cond., XLPE insul., Beldfoil? shield (100% c; 3 cond.(VFD) plus 1 ground wire-10 AWG stranded (105x30) TC cond., XLPE insul., Duofoil? and TC braid Shield (100% acdrain, PVC jacket.
  • 29520C - 16 AWG 3C VFD Cable Flexible Motor Supply Bare Copper Overall Dual Tape UL Type TC-ER 600V - Black Belden
    16 AWG 3C 7x24 Stranded Bare Copper Conductor - Spiral Copper Overall Dual Tape Shielding - Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 600V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29521C - 14 AWG 3C VFD Cable Flexible Motor Supply Bare Copper Overall Dual Tape UL Type TC-ER 600V - Black Belden
    14 AWG 3C 7x22 Stranded Bare Copper Conductor - Spiral Copper Overall Dual Tape Shielding - Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 600V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29522C - 12 AWG 3C VFD Cable Flexible Motor Supply Bare Copper Overall Dual Tape UL Type TC-ER 600V - Black Belden
    12 AWG 3C 7x20 Stranded Bare Copper Conductor - Spiral Copper Overall Dual Tape Shielding - Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 600V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29523C - 10 AWG 3C VFD Cable Flexible Motor Supply Bare Copper Overall Dual Tape UL Type TC-ER 600V - Black Belden
    10 AWG 3C 7x18 Stranded Bare Copper Conductor - Spiral Copper Overall Dual Tape Shielding - Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 600V - Industrial Cable for Variable Frequency Drive - Black Belden
  • 29524C - 8 AWG 3C VFD Cable Flexible Motor Supply Bare Copper Overall Dual Tape UL Type TC-ER 600V - Black Belden
    8 AWG 3C 7x16 Stranded Bare Copper Conductor - Spiral Copper Overall Dual Tape Shielding - Flexible Motor Supply VFD Cable - XLPE Insulation PVC Jacket UL Type TC-ER - 600V - Industrial Cable for Variable Frequency Drive - Black Belden

Page: 1 | 2 | 3    Next >>>

Finding the Right VFD Cable Match

The first things to bear in mind when selecting a Variable Frequency Drive cable is that there are special requirements and characteristics for every load. Understand the nature and requirements of the load. Your cable must have a high enough current capacity to stay in line with a load’s torque, speed, and power abilities. By choosing the most appropriate VFD cable, you can also benefit from lower levels of noise, a reduction in voltage reflections, and a lowered risk of repairs needed due to failed motor cables.

 From Belden and Alpha, there are basically two varieties of Variable Frequency Drive cable: those graded for construction and another rated for high performance. Construction-grade VFD cables are characterized by a more minimal level of conformity to UL and CSA standards for Tray Cable. Their construction usually consists of a single layer of copper tape for shielding. Construction-grade Variable Frequency Drive cords bare also meet NEC requirements.

On the other hand, high-performance VFD cables are more intended for applications that have a need for guarding against noise levels. As a result of their more powerful ground and shielding systems, their lower ground impedance levels can be almost as much as three times lower. A flexible stranding and tinned conductors provide greater surface area coverage, better high-frequency performance, and improved connections.

Preventing Damage to Motors and Cable Wear

Unless you have the right type of cable in a VFD application, voltage wave can be reflected back from motors, thus producing enormously high voltage levels in conductors. Aside from the possible issue of in-service motor failure, excessive wear on motor bearings, and damage to drives, there is also the added concern that cables could be damaged from this misuse over the long term. Failures of these sort will inevitably lead to whole systems being brought down, with downtime in production being the worst consequence.

OneStopBuy.com is here to help you find the right motor supply cable for your needs, at the best possible price. Start benefiting today from the important energy-saving and equipment-enhancing features of Variable Frequency Drive cable, MC-HL, Armored VFD, and motor supply cable.