Conductor: Stranded bare copper Class B per UL 83 Insulation: Extruded polyvinyl chloride to UL requirements for Class THHN and THWN insulation, which with nylon jacket is approved for Type THHN and THWN wires per UL 83
- 14 & 12 AWG - Insulation thickness .015", Nylon thickness .004"
- 10 AWG - Insulation thickness .020", Nylon thickness .005" Assembly: The conductors are cabled with fillers where needed to make a round compact core and a suitable tape is applied over the construction Color Code Chart 106:
Cond. Num.
Color
Cond. Num.
Color
1
Black
2
White
3
Red
4
Green
5
Orange
6
Blue
7
White w/ Black Stripe
Color Code Chart 107:
Cond. Num.
Color
Cond. Num.
Color
1
Black
2
Red
3
Blue
4
Orange
5
Yellow
6
Brown
7
Red w/ Black Stripe
8
Blue w/ Black Stripe
9
Orange w/ Black Stripe
10
Yellow w/ Black Stripe
11
Brown w/ Black Stripe
12
Black w/ Red Stripe
13
Blue w/ Red Stripe
14
Orange w/ Red Stripe
15
Yellow w/ Red Stripe
16
Brown w/ Red Stripe
17
Black w/ Blue Stripe
18
Red w/ Blue Stripe
19
Orange w/ Blue Stripe
20
Yellow w/ Blue Stripe
21
Brown w/ Blue Stripe
22
Black w/ Orange Stripe
23
Red w/ Orange Stripe
24
Blue w/ Orange Stripe
25
Yellow w/ Orange Stripe
26
Brown w/ Orange Stripe
27
Black w/ Yellow Stripe
28
Red w/ Yellow Stripe
29
Blue w/ Yellow Stripe
30
Orange w/ Yellow Stripe
31
Brown w/ Yellow Stripe
32
Black w/ Brown Stripe
33
Red w/ Brown Stripe
34
Blue w/ Brown Stripe
35
Orange w/ Brown Stripe
36
Yellow w/ Brown Stripe
37
Black
38
Red
39
Blue
40
Orange
41
Yellow
42
Brown
43
Red w/ Black Stripe
44
Blue w/ Black Stripe
45
Orange w/ Black Stripe
46
Yellow w/ Black Stripe
47
Brown w/ Black Stripe
48
Black w/ Red Stripe
49
Blue w/ Red Stripe
50
Orange w/ Red Stripe
51
Yellow w/ Red Stripe
52
Brown w/ Red Stripe
53
Black w/ Blue Stripe
54
Red w/ Blue Stripe
55
Orange w/ Blue Stripe
56
Yellow w/ Blue Stripe
57
Brown w/ Blue Stripe
58
Black w/ OrangeStripe
59
Red w/ Orange Stripe
60
Blue w/ Orange Stripe
Jacket: Black sunlight resistant, flame retardant polyvinyl chloride per UL 1277 requirements for Type TC power and control cables
Applications:
Control circuits for operation and interconnection of protective and signaling devices, and for general use in manufacturing, industrial and commercial distribution systems
UL listed and labeled for installation in ladders, troughs, channels, solid bottom trays and other similar structures (NEC Articles 318 and 340), and in duct, conduit, wireways and all other installations approved for building wire
In hazardous locations per NEC Articles 500 and 501. May be used in wet or dry locations, sunlight resistant, and suitable for direct burial
Standards:
UL Type TC, 600 Volt
NEC Type TFN Conductors
IEEE 1202 (70,000 BTU/hr) / CSA FT4
IEEE 383 (70,000 BTU/hr)
UL Subject 1277 (70,000 BTU/hr)
OSHA Acceptable
Extended Run Rated
Have a Question?
To Buy Items from OneStopBuy.com locate the Add to Cart button above.
For additional information or large order/international shipping quotes please complete the form below.
