20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Decora Plus Duplex Receptacle, Straight Blade, Hospital Grade, GFCI Ground Fault, SmartLockPRO Buttons Match Face, w/ Indicator Light, Back & Side 20A Feed-Thru Wired, Steel Strap, - Red
Also Available in These Colors (Click to Change Color)
Have a Question?
Product Features:
Ground:
GFCI Ground Fault
Feature:
SmartLockPRO Buttons Match Face
Amperage:
20 Amp
Voltage:
125 Volt
NEMA:
5-20R
Pole:
2
Wire:
3
Termination:
Back & Side 20A Feed-Thru
Face Material:
Nylon
Body Material:
Nylon
Strap Material:
Steel
Color:
Red
Standards and Certifications:
UL/CSA
Warranty:
2-Year Limited
Diagnostics:
w/ Indicator Light
Features and Benefits:
Automatically test the GFCI every time the RESET button is pushed in. The GFCI will not reset if the GFCI circuit in not functioning properly.
By blocking reset of the GFCI if protection has been compromised, SmartLockPRO reduces the possibility of end-users incorrectly assuming that a reset GFCI outlet is providing ground fault protection when it actually is not.
A line-load reversal diagnostic feature is provided which prevents the GFCI from being reset and stops power from being fed to the GFCI receptacle face or through to downstream devices. A green LED indicator on the GFCI's face also illuminate4s to alert the installer to the line-load wiring reversal.
The trip latch mechanism in SmartLockPro GFCIs is a one piece "T" design for efficient operation
There are 4 sets of contacts for load terminals and face. SmartLockPRO GFCIs use a patented bifurcated bridge contact for efficient operation
Trip threshold meets or exceeds UL requirements for tripping time
Improved immunity to high-frequency noise reduces nuisance tripping
Advanced electronics design provides superior resistance to electrical surges and over-voltages
Expanded wiring options with nine back-wire holes 9two for each line and load connection plus one for ground with an internal clamp)
Silver alloy contacts
Compatible with all Decora devices and wallplates; available in select Decora colors
Electrical Specifications
Current Limiting
2kA
Temperature Rise
Max 30C after 50 cyc OL at 150 pct rated current
Mechanical Specifications
Terminal ID
Brass-Hot, Green-Ground, White-Neutral
Product ID
Ratings are permanently marked on device
Material Specifications
Face Material
Nylon
Body Material
Nylon
Line Contacts
Brass Triple-Wipe .031 Thick
Terminal Screws
Plated Steel 8-32
Grounding Screw
Plated Steel 8-32
Yoke
Zinc-Plated Steel
Clamp Nuts
Zinc-Plated Steel
Environmental Specifications
Flammability
Rated V-2 per UL94
Operating Temp.
-35C to 65C
Standards and Certifications
NEMA
WD-6
ANSI
C-73
UL498HG
File E48380
CSA C22.2 No. 42
File LR-57811
NOM
057
Performance Data
Diagnostics
w/ Indicator Light
Trip Level
5mA plus or minus 1mA
For additional information regarding this product complete the form below.
Direct Telephone Support Mon-Fri 7AM - 5PM CDT, Call 1-877-633-5212
